It's all about the music

As a sophomore in high school, I was one of two drummers in our school jazz band. This may sound strange, but at our school the band had as much prestige as any of the athletic teams, and the jazz band was the top of the heap. It was an honor, but also a lot of pressure, to be in that band.

For the first couple of months, I struggled to open up in rehearsals. My playing was stiff and not very musical. I had a hard time reading the charts and couldn't see the, "big picture," of the pieces we were playing.

Each fall our band director brought in a clinician to work with us, an amazingly gifted and inspiring educator, the illustrious Dr. Newell Dayley. During the session with Dr. Dayley, I was more than usually nervous. I buried my head in the chart and tried for all I was worth to play every figure, hit, fill and groove to exact specifications. Our band had a very good reputation, and I wanted badly to live up to it.

Near the end of the rehearsal, Dr. Dayley walked over to me, smiled, and said, "How well do you know this piece of music?"

"Pretty well, I guess," I replied.

He smiled again, then took the chart off my music stand and started to kick off the band. I didn't know what to think - didn't know what to do.

How could I play the music without my part? What would I do without the chart?

Something seriously strange happened when we started to play. My entire approach changed. It was as if I had been playing under a cover, in a cave - as if in total darkness - and now the sun had come out, the clouds had lifted, and the drumming sunshine was bright and clear.

While playing without the sheet music to glue my eyes to, I was able to make eye contact with my rhythm section mates, as well as to look around at the other sections - to pay attention to what and how they were playing in a new way - and to take cues from the director.

Now, I'm sure it wasn't my best playing that day, but to my fifteen-year-old mind it was a totally new experience. I was no longer playing notes, figures and rhythms.

I was playing music.

When we finished the tune, one of the trumpet players looked at me and said, "I don't know what that was, or where you found it, but you'd better find it again!"



It was awesome. I loved it. It changed my perspective on playing music forever.

Scott Hagen, Director of Bands at the University of Utah, is fond of saying that the music is what happens between the lines, notes, rhythms and rests. So, next time you sit down to play a piece of music, be sure not to stop where the ink ends.

Happy drumming. 

Friday Feature: Steve Gadd

About a million name puns came to mind when deciding how to introduce the legendary Steve Gadd, but....I'll let you make your own. 

He is the most imitated drummer of all time, and easily one of the most successful. His playing credits include Eric Clapton, James Taylor, Chick Corea, Paul Simon and Dizzy Gillespie (seriously?!) just to name a few. Known for his ability to, "get inside a tune" and play in the pocket like no one else, Gadd has been a legend for most of his life.

Visit Steve's official website here. 

My first exposure to Steve Gadd was through the music of Steely Dan. He played on one of their widely known tracks, "Aja," as well as on Paul Simon's, "Fifty Ways to Leave Your Lover." Some of today's creative, but common, grooves were innovations of Steve Gadd. He has connections to almost everything that is great about groove, feel, time and fill.

Check out this tasty treat.

You'll notice how he makes use of melody and compositional elements more than sheer power or speed. He's got plenty of both, but uses them judiciously.

One other thing: Check out the relative simplicity of his setup. When you compare his kit to most modern players - especially somebody like Terry Bozzio - it almost makes you laugh out loud at what he can do with such a small rig.

And this is what Steve sounded like the year I started playing the drums. Amazing playing!

Well, as always, I simply hope to give you a jumping off place. And I hope that Steve Gadd influences your playing as he has for countless thousands of drummers for the last 40+ years.

Happy drumming!

Gear Up: Drumheads - Toms

Aaaaaaaalright! It's finally time for the last (for now) installment of our discussion on heads. We'll keep it super simple, short, and to the point.

For the batter head, you basically have a few choices.

• Single or double ply?
• Clear or coated?
• Pinstripes, oil-filled or other 'affects?'

And for the resonant side, the same choices basically apply. In general, you want a thinner, clearer head on the bottom than on the top.

Here are some great places to start surfing for new heads:

Remo

Evans

Aquarian

Attack

I currently own and play heads from all four of these companies. There are reasons to like and dislike all of them! There are some other makers, as well, but these are the most common. 

Your choices must be determined by two things: how you want to sound and where you're going to play. If you're playing jazz in a club, you're going to make very different choices than if you're making a heavy metal recording in the studio.

Just remember that the thicker the head, the more plies, the more - whatever - that's on/in/attached to the head, the shorter, punchier and more focused the sound. 

Also, how should the heads be tuned? You have some choices here, as well. 

• Tune both heads to the same pitch. Many jazz and bebop players take this route.
• Tune the batter lower than the resonant side. Good for rock, pop, country, etc.
• Tune the resonant side lower than the batter. Gives the lowest, "chunkiest" fundamental sound.

I tune all of my toms with the pitch of the resonant head a minor third* (a step and a half) higher than the batter head. This gives a decent amount of resonance, and a stable pitch center. They sound great live or under a mic. 

And I know I've written this many times, but remember that your drums will sound very different under a mic or out in the audience than you hear them from the driver's seat. Make sure to get a good, accurate soundcheck by listening to the playback or walking around the venue while someone else bangs the ol' skins. 

Don't be afraid to try new things, and whenever you hear something you like - find out what they're using and how they're getting the sounds. 

Good luck and happy drumming!

*Think of the first two notes of the melody of Brahms' "Lullabye" and you've got a minor third. 

Bag of Tricks: The Wallflowers - "One Headlight"

This is the opening lick to one of my all-time favorite pop tunes, "One Headlight" by The Wallflowers.

And I know this is a drumming blog, but I've got to mention at least one of the many genius lyrics - this is in the third verse:

This place is old, it feels just like a beat-up truck
I turn the engine, but the engine doesn't turn


Love it. Enjoy!

Bag of Tricks: Anna Nalick - "Satellite"

At the 2:58 mark, this fill caught my attention.

Gear Up: Microphones Part 2

Last week, I mentioned a few suggestions on some microphones to get started with for drums.

This week, where in the world do you place them? What will get the best and most consistent sound?

First, don't reinvent the wheel. Whenever you work with a good sound tech, watch what they do, and ask them questions (nicely, at appropriate times, and respectfully, of course) about why they do it the way they do. Listen and learn. There are also myriad websites that have very clear, complete information.

I'm definitely not a sound engineer, but there are a few really simple concepts that I have used for years that have produced good, consistent results. Again, there are a lot of factors at play here, including your drums/heads, tuning, the size and shape of the room, how loud you play, other sound sources on the stage, etc*.

One semi-funny story: Back in the day, I played with a band called Hillside Nine. We got a gig playing at a high school for a huge senior party. Lots of fun. After sound check the engineer asked if there was anything else we needed, and I jokingly said, "Just make us sound amazing, okay?" He replied without missing a beat, "Ah, okay. I'll turn the 'Talent' knob all the way up, and the 'Suck' switch completely off. Will that work?"

Oh, if only it were that simple! Anyway, on to the good stuff.

Snare and Toms
Line up the end of the microphone (the end where it captures the sound - it usually has a screen) with the hoop/rim of the drum, at least an inch above the hoop - mine are about 2-3" up - and angle the mic at the dead center of the drum. The microphone will end up at about a 30ish degree angle up from the plane of the drum head. Try it out. You'll like it!

Kick Drum
My drum's resonant (front) head is ported. That means it has a five inch hole cut in the head, at about the 4 o'clock position. I have had good results putting the mic through the port, with the end of the mic (again, the screen/capture side) about three inches inside the drum, pointed at the dead center of the batter head. If your kick drum doesn't have a front head (or if you've removed it for recording), move the mic to about the halfway point of the shell, right in the middle, and point it at the center of the resonant head.

Overhead/Cymbals
I like to use two identical mics to capture the cymbals and full kit sound. One mic sits over my left hand area, pointed at the place where my left side crash overlaps my hi-hat. The right side hangs over my ride cymbal where it hangs over my floor tom. Both are just above head level, out of range of an errant stick stroke.

Especially if you're using mics a lot, and even more especially in a recording setting, it's worth experimenting with different placements - angles, heights, alignments and how far over the drum it sits.

Happy drumming!


*Okay, one MAJOR tip: the best mics, sound engineer and placement won't make your drums sound good if they don't already. Before you go to the gig, make sure that your instrument is in good working order - heads in good shape, and well tuned. This will have the BIGGEST impact on how good you sound. That, and the P word: PRACTICE!!

Gear Up: Drum Dial

I'm having a serious conundrum. To Drum Dial or not to Drum Dial?

The Drum Dial is a relatively simple tool (similar to a durometer) that measures the tension of a drumhead. You use it by placing it on the drumhead next to each tension rod, relatively close to the hoop.

In theory, when you get the tension exactly the same around the entire head, it's in tune. Of course, you have to take into account the type of drum, its depth, the type of heads, and the relationship of the heads to each other (resonant to batter).

Drum tuning purists (yep, there really are such people - including me, to a degree) argue that tools like the Drum Dial are "cheating," for lack of a better term. They say that you should be able to tune your drums yourself, by ear. And if you can't, well, then you don't deserve to sound good. And I know plenty of skilled drummers who have never learned to tune their own drums. They play great, but sound awful.


I mean, hey, if Peter Erskine* uses it, it can't be all bad, right?

My DW Kit

About six months ago I put all new batter heads on my DW drum kit. As an experiment, I used the Drum Dial on all of the heads, both sides. Also, I used the recommended tensions from the Drum Dial web site.  I was pretty happy with the results in my studio, but I needed to get out on a gig with them, so I took them to the very next show I had.

I got an interesting reaction from the bass player on the gig (Ryan Tilby). While we were sound checking, he turned to me and said, "Wow. That sounds exactly like a backline kit."**

Truth be told, the heads required quite a bit of fine tuning after using the Drum Dial. Just having the dial read the same number at each lug wasn't enough to get the head to sound "clear" (without waves or beats) and open. That part had to be done by ear. But the dial did drastically speed up the process of getting the drumheads to the fine tuning phase.

To me, I think that's the answer. The tools we have are still only tools, so the actual work of getting your drums to sound the way you want them to is still up to you. It's like fixing cars. Sure, we have power tools, hydraulic equipment and sophisticated computers, but the work is still in the hands of the mechanic.

The Drum Dial, and tools like it, are just a part of your arsenal to achieve great sounding drums.

That being said, I'd love to have a spreadsheet of every drummer in the world that showed which drum they're using, what heads, and at what tension. Then I could sound like anybody I want. Does that seem like giving up too many trade secrets?

What do you think?

As always, happy drumming!

*If you don't know who Peter Erskine is or aren't familiar with his work, click his name above. He has been a huge, positive influence on many a drummer, including me.


**A backline kit refers to a rented drum set that is tuned in a very standard, generic way. The drums will sound good, but usually not distinctive. It is left up to the drummer or tech to individualize the sounds to the specific style or venue.